5.6 Troubleshooting: scope card

In some practical cases, it might be needed to review the raw time signal that flows into DIRAC, for instance, to troubleshoot corrupted sensor signals. The Scope card provides a simplistic time data viewer to do just that. It can be activated from the main ribbon or by right-clicking in the Hardware card on any channel and choosing Show in scope. An example of the Scope card is shown in the following figure.

Example of the scope card

Within the scope, one can choose between showing the raw voltage data or the calibrated quantities such as sensors accelerations in m/s2.


    Contact us for more VIBES


    Contact our support team or call us on +31 85 822 50 49

    ×