3.4 Inspector

The inspector card allows you to view and edit the details of your topology items, their interfaces, and links. To open it, you have to click on .

Inspecting objects in the design area

To inspect links and components, complete the next steps:

  1. Open the Inspector card.
  2. Select the link or component in the design area.

Editing the interface mapping of components

You can edit the interface mapping of a component at a later stage in the inspector

To edit the interface mapping, complete the next steps:

  1. Select the component in the Design Area.
  2. Open the Inspector card.
  3. Click Edit Mapping.
  4. Drag and drop the model interface to the correct topology interface.

Selecting the link DoFs

You can select which Degrees of Freedom you want to have or remove from the link.

To edit the link DoFs, complete the next steps:

  1. Select a link in the Design Area.
  2. Open the Inspector card.
  3. Check or uncheck the checkbox corresponding to the desired DoF.

    Contact us for more VIBES

    Contact our support team or call us on +31 85 744 09 70

    ×