The Hardware card shows circle diagrams or level bars for every input channel, reflecting the live amplitudes of incoming signals. For convenience, they can be grouped per sensor type and/or virtual point. Unmapped channels can be shown or hidden.
Channels are auto-zeroed by right-clicking in the Hardware card and selecting “Auto-zero all Channels”. It is recommended to auto-zero all channels any time that new equipment is connected, when coming back from coffee breaks or any other unattended interval.
Once the DAQ is connected, the measurement is automatically set to “active” such that the DAQ is ready for a trigger. The measurement can be paused by pressing the “Pause Measurement” within the Hardware card. The key command for this is F10. The status is shows in the taskbar.
Still haven't found what you are looking for?
Contact our support team or call us on +31 85 744 09 70